Camera Control Panel

Previous Next  Print this Topic

This Control panel is only enabled if a camera port containing a camera that supports Wiper or Day/Night mode functions is selected.

Wiper - Options for the camera wiper to clean. Duration options are: 10 seconds, 1 minute, 15 minutes, 30 minutes, 1 hour, and 2 hours. Also select Start and Stop buttons. (Enabled only if camera has wiper functionality.)

Day/Night Mode - Options are Day, Night, and Auto. If Auto is selected the camera automatically adjusts to determine the correct mode. (This is enabled only if it is supported by Phoenix LVE for your camera, and if the camera has Day/Night Mode functionality.)