Key Configurations

Previous Next  Print this Topic

Phoenix EXP enables you to use special settings to modify its default functionality. These settings are called "keys." It is important to note that a Windows operating system uses keys differently than a Linux or Mac operating system.

Windows 32-bit - Keys for customizing functionality are located in the Registry at <Local Machine>\Software\SoleraTec\Phoenix.
Windows 64-bit - Keys for customizing functionality are located in the Registry at <Local Machine>\Software\Wow6432Node\SoleraTec\Phoenix.
Linux - A file at /etc/SoleraTec/Keys.conf is created when it is installed.
Mac - A file at /Applications/SoleraTec/Keys.conf is created when it is installed.

Keys.conf File Format (Linux and Mac Only)

One key per line.
Line is terminated by a new line character <NEWLINE> or end of file <EOF>.
Fields in line are delimited by <TAB> or <SPACE>.

Keys.conf Line Format

<Name><TAB><Type><TAB><Length><TAB><Value>[\n,EOF]

<Name> is limited to 1024 characters.
<Type> As specified in table below.
<Length> As specified in table below.
<Value> format depends on the type of data:
Char: The value is read as a character string.
Int32: The value is read as a 32 bit signed integer.
Binary: The value is read as a series of bytes with each byte represented by a hex pair with a single space between each byte.

Keys.conf Line Format Examples

key_name_1<TAB>Char<TAB>18<TAB>this is a char key<NEWLINE>
key_name_2<SPACE>Int32<SPACE>4<SPACE>1234<NEWLINE>
key_name_4<TAB>Binary<TAB>14<TAB>1a 2e f1 20 9d<EOF>

Keys

By default, only the InstallRoot key is included when Phoenix EXP is installed.

Key

Name: CameraCacheDir

Description: Specifies a location where Phoenix EXP applications may store temporary video captured directly from cameras.

Default:

<Product Installation Directory>/VideoCache

Used by: All Phoenix EXP Extension applications

Windows Registry Settings:

Key Type: String value

Value: Pathname of directory

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of directory

Sample Usage: CameraCacheDir Char 13 C:/VideoCache

Name: CCExtractorPathname

Description: Pathname of the executable used to extract closed caption data from video.

Default:

Windows: <Product Installation Directory>\Bin\CCExtractor.exe

Non-Windows: <Product Installation Directory>/Bin/CCExtractor

Used by: Target and Process

Windows Registry Settings:

Key Type: String value

Value: Pathname of executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of executable

Sample Usage: CCExtractorPathname Char 14 C:/MyExtractor

Name: CntMaxTermsPerDoc

Description: Specifies the maximum number of terms that will be scanned for content keyword generation in a single file.

Default: 10485760

Used by: Vault

Windows Registry Settings:

Key Type: DWORD value

Value: Limit in number of terms

Keys.conf Format:

Type: Int32

Length: 4

Value: Limit in number of terms

Sample Usage: CntMaxTermsPerDoc Int32 4 5000

Name: CntTextExtList

Description: Specifies which files will be considered text files and thus scanned for content.

Default: doc;txt;cfg;cpp;c;cc;cxx;h;dsw;exc;hpp;rtf;htm;html;hxx;log;mk;ppt;rc;sln;vbvbs;bat;xls;xml;sh;cshrc;shrc

Used by: Vault

Windows Registry Settings:

Key Type: String value

Value:

<text extension list>: <text extension>[SEMI-COLON <text extension>]*

<text extension>: <string of characters>

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value:

<text extension list>: <text extension>[SEMI-COLON <text extension>]*

<text extension>: <string of characters>

Sample Usage: CntTextExtList Char 11 doc;bat;cpp

Name: CntTermsLimit

Description: Specifies the amount of a file scanned for content keyword generation.

Default: 10485760

Used by: Vault

Windows Registry Settings:

Key Type: DWORD value

Value: Limit in bytes

Keys.conf Format:

Type: Int32

Length: 4

Value: Limit in bytes

Sample Usage: CntTermsLimit Int32 4 1024

Name: DataServicesSvcPriority

Description: Set process priority of DataServicesSvc.

Default: standard

Used by: DataServicesSvc

Windows Registry Settings:

Key Type: String Value

Value: low, standard, high

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: low, standard, high

Sample Usage: DataServicesSvcPriority Char 4 high

Name: DbSyncIntOps

Description: Number of operations between syncing database to disk. A value of zero will disable all sync operations.

Default: 10000

Used by: VaultSvc

Windows Registry Settings:

Key Type: DWORD value

Value: Number of operations

Keys.conf Format:

Type: Int32

Length: 4

Value: Number of operations

Sample Usage: DbSyncIntOps Int32 4 10246

Name: DoBroadcast

Description: Enable broadcast of events and messages such as location of Vaults and Vault startup/shutdown.

Default: 1 (true)

Used by: VaultSvc, TgtProcSvc, LocSvc

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (false) or 1 (true)

Keys.conf Format:

Type: Int32

Length: 4

Value: 0 (false) or 1 (true)

Sample Usage: DoBroadcast Int32 4 1

Name: DoMulticast

Description: Enable multicast of events and messages such as location of Vaults and Vault startup/shutdown.

Default: 1 (true)

Used by: VaultSvc, TgtProcSvc, LocSvc

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (false) or 1 (true)

Keys.conf Format:

Type: Int32

Length: 4

Value: 0 (false) or 1 (true)

Sample Usage: DoMulticast Int32 4 1

Name: FfmbcExePathname

Description: Pathname to ffmbc executable.

Default: <install-dir>/Bin/ffmbc.exe

Used by: VideoComponentsGen

Windows Registry Settings:

Key Type: String value

Value: Pathname of executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of the executable

Sample Usage: FfmbcExePathname Char 14 C:/MyFfmbc.exe

Name: FfmpegExePathname

Description: Pathname to ffmpeg executable.

Default: <install-dir>/Bin/ffmpeg.exe

Used by: VideoComponentsGen

Windows Registry Settings:

Key Type: String value

Value: Pathname of executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of executable

Sample Usage: FfmpegExePathname Char 15 C:/MyFfmpeg.exe

Name: FfmpegJoinExePathname

Description: Pathname to joining version of ffmpeg executable.

Default: <install-dir>/Bin/ffmpeg_v112.exe

Used by: VideoComponentsGen

Windows Registry Settings:

Key Type: String value

Value: Pathname of executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of executable

Sample Usage: FfmpegJoinExePathname Char 15 C:/MyJoiner.exe

Name: InstallRoot

Description: The location of /Phoenix directory.

Default: /usr/local/Phoenix

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: Pathname of the root directory

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of the root directory

Sample Usage: InstallRoot Char 18 /usr/local/Phoenix

Name: IpAddressList

Description: Restricts TCP addresses that are used when the computer has multiple network connections.

Default: Addresses of all network connections

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value:

<address list>: <address>[COMMA <address>]*

<address>: <xx.xx.xx.xx>/<mask>

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value:

<address list>: <address>[COMMA <address>]*

<address>: <xx.xx.xx.xx>/<mask>

Sample Usage: IpAddressList Char 40 192.168.1.0/ffffff00,127.0.0.1/ffffff00

Name: LfrMaxFileSizeBytes

Description: Specifies the maximum file size in bytes for log file rotation.

Setting a value that is less than the default value could result in slower system operation.

Default: 10485760 (10MB)

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: DWORD value

Value: Limit in bytes, greater than zero

Keys.conf Format:

Type: Int32

Length: 4

Value: Limit in bytes, greater than zero

Sample Usage: LfrMaxFileSizeBytes Int32 4 10485760

Name: LfrMaxNumFiles

Description: Specifies the maximum number of files to keep during log file rotation.

Setting a value that is less than the default value could result in slower system operation.

Default: 2

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: DWORD value

Value: Limit in number of files, greater than 1

Keys.conf Format:

Type: Int32

Length: 4

Value:  Limit in number of files, greater than 1

Sample Usage: LfrMaxNumFiles Int32 4 2

Name: LfrCheckIntervalSec

Description: Specifies the check interval in seconds for log file rotation.

Setting a value that is less than the default value could result in slower system operation.

Default: 3600 (1 hour)

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: DWORD value

Value: Interval in seconds, greater than zero

Keys.conf Format:

Type: Int32

Length: 4

Value:  Interval in seconds, greater than zero

Sample Usage: LfrCheckIntervalSec Int32 4 3600

Name: LocSvcPriority

Description: Set process priority of LocSvc.

Default: standard

Used by: LocSvc

Windows Registry Settings:

Key Type: String Value

Value: low, standard, high

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: low, standard, high

Sample Usage: LocSvcPriority Char 4 high

Name: MediaPlayerDefaultVolume

Description: Specifies the initial volume setting when playing video.

Default: 50

Used by: Video Content Manager, Surveillance Video Manager, Live Viewer

Windows Registry Settings:

Key Type: DWORD value

Value: Volume, greater than zero

Keys.conf Format:

Type: Int32

Length: 4

Value: Volume, greater than zero

Sample Usage: MediaPlayerDefaultVolume Int32 4 50

Name: MulticastAddress

Description: Specifies the multicast address used when various components communicate.

Default: 224.0.23.160

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: IP address

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: IP address

Sample Usage: MulticastAddress Char 12 226.0.19.156

Name: MulticastIfcAddress

Description: Indicates which interface on host machine will be  used to send out multicast packets:

If a complete address is given, the network interface corresponding to that address will be used for sending multicast packets.
If an address and mask are specified, the first network interface that matches the non-masked portion of the specified address will be used.

Using a mask enables a network interface to be specified by network address. Using a mask avoids errors when the network interface changes address through the use of DHCP.

Default: Interface chosen by host machine

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: <xx.xx.xx.xx> or <xx.xx.xx.xx>/<mask>

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: <xx.xx.xx.xx> or <xx.xx.xx.xx>/<mask>

Sample Usage: MulticastIfcAddress Char 20   192.168.1.0/ffffff00

Name: MulticastTtl

Description: Specifies the multicast TTL (Time To Live) value.

Default: 255

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: DWORD value

Value: TTL value

Keys.conf Format:

Type: Int32 in the range of 0 - 255

Length: 4

Value: TTL value

Sample Usage: MulticastTtl Int32 4 10

Name: NotifyClearCmd

Description: Command to execute when clearing an error condition. Used for notification.

Default: none

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: Pathname to the batch file

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname to the batch file

Sample Usage: NotifyClearCmd Char 27 C:/MyNotificationScript.bat

Name: NotifySetCmd

Description: Command to execute when clearing an error condition. Used for notification.

Default: none

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: Pathname to the batch file

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname to the batch file

Sample Usage: NotifySetCmd Char 27 C:/MyNotificationScript.bat

Name: PictureExtList

Description: Specifies which files will be considered picture files and therefore processed as picture files when option is enabled in Target and Process Policies (if enabled) or manual Target and Process jobs (if enabled).

Default: bmp;gif;jpeg;jpg;pict;pct;png;raw;tif;tiff

Used by: Target and Process, Target and Process Policies, Target and Process Service

Windows Registry Settings:

Key Type: String value

Value:

<picture extension list>: <picture extension>[SEMI-COLON <picture extension>]*

<picture extension>: <string of characters>

Keys.conf Format:

Type: Char

Length: Number of characters in picture

Value:

<picture extension list>: <picture extension>[SEMI-COLON <picture extension>]*

<picture extension>: <string of characters>

Sample Usage: PictureExtList Char 11 bmp;gif;jpg

Name: PrimaryNicName

Description: Defines the NIC (Network Interface Card) which is used as the primary interface.

Default:

In Linux, the primary network interface card (NIC) is chosen by looking for the first non-zero IP address, "Up" device eth0, eth1, eth2, ...  If none found, then first device as shown in "ifconfig -a".

Apple is same as Linux except uses device names en0, en1, en2, ...

Windows is chosen using the first non-zero, "Enabled" NIC in the list shown in the Advanced Settings dialog box in the Network Connections window. Open Network Connections and Advanced Settings option in the Advanced menu.

In all cases above, the Local Loopback device is only chosen if no other device is available.

Used by: All Phoenix EXP applications.

Windows Registry Settings:

Key Type: String value

Value: Network Interface Description

Keys.conf Format:

Type: Char

Length: Number of characters in value

Value: Network Interface Name

Sample Usage: PrimaryNicName Char 4 eth0

Name: RccMinVideoSizeBytes

Description: Minimum size that a RTSP recorded video file must have to be considered valid, in bytes.

Default: 10240

Used by: TgtProcSvc

Windows Registry Settings:

Key Type: DWORD

Value: Size in bytes

Keys.conf Format:

Type: Int32

Length: 4

Value: Size in bytes

Sample Usage: RccMinVideoSizeBytes Int32 4 8192

Name: RestrictedPortsList

Description: Restricts TCP port usage to a set or range.

Default: Use all ports

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value:

<ranges>: <range> [COMMA <range>]*

<range>: <port-low> HYPHEN <port-high>

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value:

<ranges>: <range> [COMMA <range>]*

<range>: <port-low> HYPHEN <port-high>

Sample Usage: RestrictedPortsList Char 20 5000-5110,5500-5521

Name: SarAdvancedFeaturesEnable

Description: Enables metadata editing, file grouping, file purging, and file protection settings editing via Search and Retrieve.

Default: 0 (disabled)

Used by: Search and Retrieve

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (disabled) or 1 (enabled)

Keys.conf Format:

Type: Int32

Length: 4

Value:  0 (disabled) or 1 (enabled)

Sample Usage: SarAdvancedFeaturesEnable Int32 4 1

Name: SarNoDelFilesInSearch

Description: When set to "1" for either host or user, it will not allow the user to make the choice to include deleted files in their searches.

Default: 0 (disabled)

Used by: Search and Retrieve

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (disabled) or 1 (enabled)

Keys.conf Format:

Type: Int32

Length: 4

Value:  0 (disabled) or 1 (enabled)

Sample Usage: SarNoDelFilesInSearch Int32 4 1

Name: SarPurgeFeatureEnable

Description: When set to "1" for either host or user, it will allow the user to use the Purge functionality in Search and Retrieve.

Default: 0 (disabled)

Used by: Search and Retrieve

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (disabled) or 1 (enabled)

Keys.conf Format:

Type: Int32

Length: 4

Value:  0 (disabled) or 1 (enabled)

Sample Usage: SarPurgeFeatureEnable Int32 4 1

Name: TapeFsGetIntSec

Description: Interval in seconds at which a tape drive is queried for remaining free space on the current tape. Minimum is 2 seconds.

Default: 10

Used by: VaultSvc

Windows Registry Settings:

Key Type: DWORD value

Value: Interval in seconds, greater than or equal to 2

Keys.conf Format:

Type: Int32

Length: 4

Value: Interval in seconds, greater than or equal to 2

Sample Usage: TapeFsGetIntSec Int32 4 10

Name: TapeMinBlockSizeKB

Description: Sets the minimum block size for data written to tape.

Default: 48

Used by: VaultSvc

Windows Registry Settings:

Key Type: DWORD value

Value: Block size

Keys.conf Format:

Type: Int32

Length: 4

Value: Block size

Sample Usage: TapeMinBlockSizeKB Int32 4 48

Name: TapUseHardLink

Description: Specifies the use of hard links and applies only to "move" operations where the camera cache is located on the same file system as the destination storage media.

Default: 0 (false)

Used by: TgtProcSvc

Windows Registry Settings:

Key Type: DWORD value

Value: 0 (false) or 1 (true)

Keys.conf Format:

Type: Int32

Length: 4

Value: 0 (false) or 1 (true)

Sample Usage: TapUseHardLink Int32 4 1

Name: TapVideoCaptureWriteBufferSizeKB

Description: Sets the video capture write buffer size in kilobytes.  If zero, then use system buffer setting.

Default: 0

Used by: TgtProcSvc

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 0

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 0

Sample Usage: TapVideoCaptureWriteBufferSizeKB Int32 4 0

Name: TempDir

Description: Specifies a location where Phoenix EXP applications may store temporary files.

Default:

Windows: Documents and Settings/<user>/Local Settings/Temp

Non-Windows: /tmp

Used by: All Phoenix EXP applications

Windows Registry Settings:

Key Type: String value

Value: Pathname of directory

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of directory

Sample Usage: TempDir Char 7 C:/tmp

Name: TgtProcSvcPriority

Description: Set process priority of TgtProcSvc.

Default: standard

Used by: TgtProcSvc

Windows Registry Settings:

Key Type: String Value

Value: low, standard, high

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: low, standard, high

Sample Usage: TgtProcSvcPriority Char 4 high

Name: VaultSvcPriority

Description: Set process priority of VaultSvc.

Default: standard

Used by: VaultSvc

Windows Registry Settings:

Key Type: String Value

Value: low, standard, high

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: low, standard, high

Sample Usage: VaultSvcPriority Char 4 high

Name: VideoClipGenPathname

Description: Pathname of executable to create a clip of a video file.

Default: <install-dir>/Bin/VideoComponentsGen.exe

Used by: VaultSvc

Windows Registry Settings:

Key Type: String value

Value: Pathname of executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname of executable

Sample Usage: VideoClipGenPathname Char 16 C:/MyClipper.exe

Name: VideoComponentsGenBackend

Description: VideoComponentsGen's backend package to use.

Default:

Used by: Target and Process, TgtProcSvc, Video Content Manager, Surveillance Video Manager

Windows Registry Settings:

Key Type: String value

Value:

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value:

Sample Usage: VideoComponentsGenBackend Char

Name: VideoComponentsGenMaxInstances

Description: The number of transcoding processes that can be run simultaneously. It can be represented in several different formats:

= : Use the number of cores (default)

0 : Unlimited

n : Use this number explicitly

*n : Multiply the number of cores by n

/n : Divide the number of cores by n

+n : Add n to the number of cores

-n : Subtract n from the number of cores

Default: =

Used by: Target and Process, TgtProcSvc, Video Content Manager, Surveillance Video Manager

Windows Registry Settings:

Key Type: String value

Value: Number of transcoding processes

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Number of transcoding processes

Sample Usage: VideoComponentsGenMaxInstances Char 2 +6

Name: VideoComponentsGenMaxThreads

Description: The number of threads that can be used by each transcoding process. A value of 0 (default) indicates that the number of threads will not be restricted but will instead be left to the transcoding engine.

Default: 0

Used by: Target and Process, TgtProcSvc, Video Content Manager, Surveillance Video Manager

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 0

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 0

Sample Usage: VideoComponentsGenMaxThreads Int32 4 0

Name: VideoComponentsGenPathname

Description: Pathname of executable to create a thumbnail or low res proxy.

Default: <install-dir>/Bin/VideoComponentsGen.exe

Used by: Target and Process, TgtProcSvc, Video Content Manager, Surveillance Video Manager

Windows Registry Settings:

Key Type: String value

Value: Pathname to executable

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: Pathname to executable

Sample Usage: VideoComponentsGenPathname Char 17 C:/MyVideoGen.exe

Name: VideoComponentsGenPictWidthLow

Description: Specifies the picture thumbnail target width, in pixels, for the low quality setting.

Default: 100

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictWidthLow Int32 4 200

Name: VideoComponentsGenPictHeightLow

Description: Specifies the picture thumbnail target height, in pixels, for the low quality setting.

Default: 100

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictHeightLow Int32 4 200

Name: VideoComponentsGenPictQualLow

Description: Specifies the picture thumbnail image quality for the low quality setting.

Default: 2

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: 1 (worst) – 10 (best)

Keys.conf Format:

Type: Int32

Length: 4

Value: 1 (worst) – 10 (best)

Sample Usage: VideoComponentsGenPictQualLow Int32 4 3

Name: VideoComponentsGenPictWidthMed

Description: Specifies the picture thumbnail target width, in pixels, for the medium quality setting.

Default: 320

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictWidthMed Int32 4 400

Name: VideoComponentsGenPictHeightMed

Description: Specifies the picture thumbnail target height, in pixels, for the medium quality setting.

Default: 240

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictHeightMed Int32 4 400

Name: VideoComponentsGenPictQualMed

Description: Specifies the picture thumbnail image quality for the medium quality setting.

Default: 5

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: 1 (worst) – 10 (best)

Keys.conf Format:

Type: Int32

Length: 4

Value: 1 (worst) – 10 (best)

Sample Usage: VideoComponentsGenPictQualMed Int32 4 3

Name: VideoComponentsGenPictWidthHigh

Description: Specifies the picture thumbnail target width, in pixels, for the high quality setting.

Default: Original picture width

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictWidthHigh Int32 4 600

Name: VideoComponentsGenPictHeightHigh

Description: Specifies the picture thumbnail target height, in pixels, for the high quality setting.

Default: Original picture height

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: Minimum of 1

Keys.conf Format:

Type: Int32

Length: 4

Value: Minimum of 1

Sample Usage: VideoComponentsGenPictHeightHigh Int32 4 600

Name: VideoComponentsGenPictQualHigh

Description: Specifies the picture thumbnail image quality for the high quality setting.

Default: 7

Used by: Target and Process Service

Windows Registry Settings:

Key Type: DWORD value

Value: 1 (worst) – 10 (best)

Keys.conf Format:

Type: Int32

Length: 4

Value: 1 (worst) – 10 (best)

Sample Usage: VideoComponentsGenPictQualHigh Int32 4 3

Name: VideoComponentsGenPriority

Description: Set process priority of VideoComponentsGen.

Default: standard

Used by: VideoComponentsGen

Windows Registry Settings:

Key Type: String Value

Value: low, standard, high

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value: low, standard, high

Sample Usage: VideoComponentsGenPriority Char 4 high

Name: VideoExtList

Description: Specifies which files will be considered video files and therefore processed as video files when option is enabled in Target and Process Policies (if enabled) or manual Target and Process jobs (if enabled).

Default: 3g2;3gp;avi;divx;f4v;fbr;flv;m4v;mkv;mov;mp4;mpg;mpg2;mts;mxf;qt;rm;swf;vob;wmv;xvid

Used by: Target and Process Service

Windows Registry Settings:

Key Type: String value

Value:

<video extension list>: <video extension>[SEMI-COLON <video extension>]*

<video extension>: <string of characters>

Keys.conf Format:

Type: Char

Length: Number of characters in Value

Value:

<video extension list>: <video extension>[SEMI-COLON <video extension>]*

<video extension>: <string of characters>

Sample Usage: VideoExtList Char 11 mpg;mxf;mov

Name: VltPrefetchQueLen

Description: Sets the limit for the number of 128K blocks which are initially read from a file when opened for transfer. This value will be reduced if the file is smaller or the device cache size is smaller.

Default: 10

Used by: Vault Service

Windows Registry Settings:

Key Type: DWORD value

Value: Number of 128K blocks initially read

Keys.conf Format:

Type: Int32

Length: 4

Value: Number of 128K blocks initially read

Sample Usage: VltPrefetchQueLen Int32 4 10